Roofing Materials

Treated Sawn Roofing Batten 25 x 50mm is a high-quality roofing batten that has been fully graded to meet the performance requirements of BS 5534. If the specified lengths are not available from stock then we will provide the closest to the length required but ensure we supply the total meterage. If you have any specific requirements then please contact us.

• Preservative treated to protect against rot and fungal attack.
• FSC certified from well managed certified forests.
• Graded to BS5534.
• Sold per m.
• Available sizes 2.4m to 4.8m.

Treated Sawn Roofing Batten 25 x 38mm is a high-quality roofing batten that has been fully graded to meet the performance requirements of BS 5534. If the specified lengths are not available from stock then we will provide the closest to the length required but ensure we supply the total meterage. If you have any specific requirements then please contact us.

• Preservative treated to protect against rot and fungal attack.
• FSC certified from well managed certified forests.
• Graded to BS5534.
• Sold per m.
• Available sizes 3.6m to 4.8m.

• 25mm x 50mm.
• Available sizes 3.6m to 4.8m.
• Please contact us for further information on additional lengths.
• High Pressure treated with Tanalith ‘E’ (or similar).
• Responsibly sourced.

• 25mm x 38mm.
• Available sizes 3.6m to 4.8m.
• Please contact us for further information on additional lengths.
• Responsibly sourced.
• High Pressure treated with Tanalith ‘E’ (or similar).

The Alukap-XR 55mm Rubber Rafter Gasket gives a full rafter cover cushioning gasket and additional waterproofing seal protection. Ideally for 60mm and wider rafters or beams.

Lengths can be ordered per meter as desired. This product is available per metre, so if you order a higher quantity it will come in a continuous length of the quantity you order. For example, if you order a quantity of 10 you will receive a 10 metre length.

Alukap-XR 45mm Rubber Rafter Gasket gives a full rafter cover cushioning gasket and additional waterproofing seal protection. The perfect rafter gasket for 45mm and wider rafters.

Lengths can be ordered per meter as desired. This product is available per metre, so if you order a higher quantity it will come in a continuous length of the quantity you order. For example, if you order a quantity of 10 you will receive a 10 metre length.

The World-Leading Alukap-XR 60mm Glazing Bar System is manufactured with aluminium, providing superior longevity. Alukap-XR 60mm provides extra cover for wider 55mm rafter structures.

The full cover cap system and all aluminium capping bar design eliminates the need to mess around with unsightly plastic caps or connectors which break down, which is why the Alukap-XR system has no instances of leaks despite accommodating roof pitches from zero degrees pitch to totally vertical.

Alukap-XR is designed and manufactured to provided a high quality screw down aluminium glazing bar system which is suitable for glass or polycarbonate of any thickness. The cover cap ensures that all fixings are cleverly concealed from view. 

Supplied with multi-fin gasket systems which are combined with the variable pressure fixing screws this Alukap-XR 60mm Glazing Bar System provides a leak-proof long-lasting roof glazing solution

Alukap-XR Glazing Bars can be bought in White, Brown or any bespoke RAL Colour. The most popular bespoke colours include black glazing bars and grey glazing bars !

These Alukap-XR Glazing bars are sometimes called Joining Strips or Joint bars by the trade. 

The world leading Alukap-XR 60mm Glazing Bar System from Clean Amber provides extra cover for wider 55mm rafter structures. The full cover cap system and all aluminium capping bar design eliminates the need to mess around with unsightly plastic caps or connectors which break down, which is why the Alukap-XR system has no instances leaks despite accommodating roof pitches from zero degrees pitch to totally vertical.

Supplied with multi-fin gasket systems which are combined with the variable pressure fixing screws this Alukap-XR 60mm Glazing Bar System provides a leak proof long lasting roof glazing solution.

The Alukap-SS Complete post & bracket kit provides maintenance free supports for the Alukap-SS Eaves Beam to rest on. Each roof is different, however it is recommended that the Alukap-SS Eaves beam is supported with one post every 2.5m.

Estimated load span advice is available upon request, although users are advised to obtain their own independent advice to verify the span calculations are correct for their site-specific application.

The Alukap-SS Wall & Eaves Beam provides a beam to support the upper and lower ends of the Alukap-SS bars. The Eaves Beam fits neatly on top of Alukap-SS posts, order your own windows or any other post or structure.

When used as a Wall Plate you simply bolt the beam to the building wall at the desired height. Endcaps for the Alukap-SS Wall & Eaves Beam are available separately.

The Alukap-SS endcap for use with wall and eaves beams.

Alukap-SS Top Wall Flashing helps seal the abutment to a rising wall and helps waterproof the connection between the roof and the wall. This top wall flashing really finished the roof with an easy-to-install connection that suits any roof angle or pitch

This Alukap-SS High Span Gable Bar provides the perfect glazing finish to a gable end rafter for the sides of any roof. The Alukap-SS High Span Bar provides an excellent all-aluminium structural beam for unsupported glazing spans up to 6m depending on glazing material and glazing bar centres.

Alukap-SS suits glass or Axiome polycarbonate of any thickness. The all-aluminium Alukap-SS system provides robust, long lasting aesthetically pleasing finish to any residential, public, or commercial canopy or roofing structure. Estimated load span advice is available upon request, although users are advised to obtain their own independent advice to verify the span calculations are correct for their site-specific application.

The Alukap-SS Low Profile Cap provides a perfect capping profile for the upper and lower ends of the Alukap-SS beam.

This Alukap-SS Low Profile Cap rests on to the Alukap-SS Wall Plate at the Upper end and the Alukap-SS Eaves Beam at the lower end of the canopy or roof. The intersection of this Alukap-SS Low Profile Cap with the Eaves Beam or Wall Plate suits pitches from 0.25 degrees up to 25.00 degrees.

The Alukap-SS High Span Cap provides a perfect capping profile for the upper and lower ends of the Alukap-SS beam.

This Alukap-SS High Span Cap rests on to the Alukap-SS Wall Plate at the Upper end and the Alukap-SS Eaves Beam at the lower end of the canopy or roof. The intersection of this Alukap-SS High Span Cap with the Eaves Beam or Wall Plate suits pitches from 0.25 degrees up to 25.00 degrees.